Multi-turn Actuator AVA01 ~ AVA10 suitable for Globe valves, Gate valves, sluice valves, penstock and some dampers. AVA01 ~ AVA10 combined with BA bevel gearbox max can reach 100,000Nm.

Quarter turn Electro-Hydraulic Actuator YKT series is installed on the automation of part turn valve, like ball valves and butterfly valves. Output torque 60Nm~120KNm(45ft-lbf to 88495ft-lbf) Fast response speed(5Hz), high control accuracy(＜0.1% of full stroke) Optional Function: Modulating I/O signal 4-20mA Explosion Proof(EexdIIBT4, ExdIICT4) Fieldbus System: Modbus, Profibus, etc.

Solar power Gas over oil actuator can provide power to gas over oil acutator when there is no external power supply at undevelped area. When there is any sunshine, the solar power board will start store 24V power for actuator and feedback actuator status to remote control room.

Quarter turn Actuator AVAT/AVATM01 - AVATM06 are installed on the automation of ball valves and butterfly valves. Quarter turn Actuator AVAT/AVATM01 - AVATM06 can be combined with lever if it is required.

Quarter turn Actuator AVAR/AVARM5 ~ AVAR/AVARM100 are suitable for ball valves and butterfly valves. Quarter turn Actuator AVAR/AVARM5 ~ AVAR/AVARM100 can be combined with lever if it is required

Linear Actuator AVAMD01 ~ AVAMD05 are suitable for control valves, such as Globe valves. Linear Actuator AVAMD01 ~AVAMD05 modulating thrust range is from (8.1KN-45.5KN)

Separate Mounting Linear Electro-Hydraulic Actuator YK series is installed on the automation of control valves, such as Globe valves. It is more simple than hydrualic actuator, can realize all function of hydraulic actuator.

Separate Mounting Linear Electro-Hydraulic Actuator YK series is designed to install on some special location, users can control valve open/close from long distance away,it can also used for space limited application. The actuator feature is as same as standard electro hydarulic actuator. The distance between control box and valve can be designed according project requirement.

Separated mount Quarter turn Electro hydraulic actuator is designed for location not easy to access or install, like high vibration or corrosive enviroment, separated actuator has no function difference with standard actuator, the protection of cover also can meet ATEX or water tight requirement. The separate mount distance can design according client's requirement.

Our Gas-over-oil Actuator is designed on the basic of our experience on Electric actuator and Electro hydraulic actuator, referring to international advanced actuator technology. It is mainly used in river crossing valve room, Station By-pass valve, Station Entrance/Exit Protection, Long distance pipeline, compressor load/unload protection, stand blowdown, emergency shutdown, line break protection, remote control, etc.

The line break protection gas over oil actuator is designed on the basic of standard actuator, can close the pipe when any pipe leakage detected. Actuator has 3 group pressure sensor, provide higher reliability on detecting pipe pressure change and protection. Our actuator has passed explosion proof and SIL approval, are widely used in UK, Russia, Pakistan and other countries.